1-CHANNEL RLC+LED DIMMING ACTUATOR WITH 4 INPUTS – RE KNT LE3

 

1-channel Universal Dimming Actuator, in small housing.



Phase control dimming technology (leading- or trailing-edge), being valid for different types of load RLC+LED:

230V~ Dimmable LED lamps.
12V~ Dimmable LED lamps with electronic transformer.
Incandescence and 230V Halogens.
12V Halogens with electronic transformer.

It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

Digital inputs (binary): allows the connection of a pushbutton, switch or conventional binary sensor, free-voltage contact.
Analog inputs: allows the connection of a temperature probe (ST KNT 001 or ST KNT 002).
Motion Detector: by connecting the sensor DM KNT 004.

Each of the four inputs has the following functions: Switch, Switch/Dimmer, Multiple Dimmer, Sequential Switch, Blind Control, Scene Control, Fixed/Forced Function, Counter and Temperature Sensor.
In addition, it allows to enable and configure up to 4 independent Thermostats.
It admits the connection of an Auxiliary Pushbutton (D) for the control of the Dimming.
Actuator or of another different actuator. Its functionality must be parameterized through the ETS.
Protected against overloads and short circuits. It incorporates heating protection of resettable operation.
Mounting into junction box.
Programming and commissioning by ETS5 or later version.

Product reference RE KNT LE3
Power Supply (V) 230VCA
Type of load 1-Channel universal dimming actuator with 4 analog/binary inputs
LED lamps load (W) 0
Dimmable 230V LED lamps (leading edge) 4W ~ 70W
Dimmable 230V LED lamps (trailing edge) 4W ~ 250W
Dimmable 12V LED lamps with electronic transformer 5 transfo of 50W and 1 lamp per transfo or 2 transfo of 100W and 1 lamps per transfo
Incandescent and Halogen 230V (W) 250
12V Halogen with electronic transformer (W) 250
Halogen lamps with ferromagnetic trafo (W 0
Motores (VA) 0
Maximum current input 1/10VDC (mA) 0
Maximum Number of Equipments 0
Binary/Analogic Inputs 4
Installation Junction box
Module number 0
Control KNX bus
Programming by ETS5 o posterior
Compatible with KNX
Connection terminals Captive Screws
Cable section (mm2) 2.5
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Degree IP20 , UNE 20324

DIMENSIONS