2-CHANNEL SWITCH/BLIND ACTUATOR WITH 4 INPUTS – PE KNT 002

 

Multifunction actuator with 2 outputs for 1 Blind/Shutter control or 2 individual outputs.



Multifunction actuator with 2 outputs for 1 blind/shutter control or 2 individual outputs.
Can work as:

2-channel Switching Actuator.
1-channel Blinds/Shutters Actuator.

It has 4 Analog/Digital inputs, which can be configured independently, through the ETS:

Digital inputs (binary): allows the connection of a pushbutton, switch or conventional binary sensor, free-voltage contact.
Analog inputs: allows the connection of a temperature probe (ST KNT 001 or ST KNT 002).

In addition, it allows enabling and configuring up to 4 independent Thermostat.
In case it is configured as 1-channel blinds/shutters actuator, the following alarms and functions are available: Wind alarm, Rain alarm, Frost alarm, Sun Protection function, Scene control and Forced function.
In case it is configured as 2-channel switch actuator, the following functions are available in each channel: Timer, Preset value, Scene control, Logical functions, Forced and Threshold function.
Each of the four inputs has the following functions: Switch, Switch/Dimmer, Multiple Dimmer, Sequential Switch, Blind Control, Scene Control, Fixed/Forced Function, Counter and Temperature Sensor.
Maximum load capacity of up to 10A per channel.
Programming and commissioning via ETS5 or later version.

Product reference PE KNT 002
Power Supply (V) 230VCA
Frequency (Hz) 50
Consumption < 3mA
Output channels 2
Switching capacity (A) 10
Type of load 1 channel of blinds switching or 2 individual output channels
LED lamps load (W) 400
Incandescent and Halogen 230V (W) 2000
12V Halogen with electronic transformer (W) 2000
Halogen lamps with ferromagnetic trafo (W) 500
Motores (VA) 700
Maximum current input 1/10VDC (mA) 0
Maximum Number of Equipments 0
Contacts Voltage-free
Binary/Analogic Inputs 4
Installation Junction box
Module number 1
Control KNX bus
Programming by ETS5 o posterior
Compatible with KNX
Connection terminals Captive Screws
Cable section (mm2) 2.5
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Degree IP20 , UNE 20324

INSTALLATION SCHEME