Supply bollard BOMBER for the distribution of services

The fixed supply bollard BOMBER is a sophisticated and modern designed column for the distribution of services, enterly made of stainless steel AISI304 or AISI316 to be resistant over time



BOMBER is the unit of distribution of electricity and services, such as water, compressed air, data transmission and audio systems, proposed as a smart solution of urban furniture.
That’s not all, because the fixed supply bollard BOMBER can be installed:

In public areas for squares, market areas, historic centers, hotels, public parks, sports centers, malls, caravan parks and camps, ports, small harbors and marinas, airports and hangars, railway stations and undergrounds and stadiums.

In private areas such as villas, swimming pools, gardens, apartment buildings, workshops and industrial facilities,the fixed service supply posts and bollards are the best solution for functionality and design.

The new line of distribution posts and columns, like the entire range of New VMR products, can be customized with different colours and finishes with the possibility to add outdoors lighting systems and pre-paied systems.

It incorporates a Display that shows both the Setpoint or Ambient Temperature and the Relative Humidity of the environment.
4 buttons with preset functionality:

Decrease Set-point Temperature
Increase Set-point Temperature
Switch On/Off Thermostat
Fan-Coil Speed

In addition, there are 2 free buttons which can be configured as a Switch, Dimmer, Control of Blinds / Shutters, Scenes, etc.
Integrated Temperature Sensor, Brightness Sensor and Relative Humidity.
Fancoil Speed LED.
Its main functionality is complemented with 4 Binary / Analog Inputs, which can be connected to a Door / Window Contact or a DINUY Temperature Probe.
Allows enabling and configuring one Heating and / or Cooling Thermostat.
Press or status indicator LEDs with ETS configurable luminosity and RGB color on the 2 freely configurable keys.
No need external power, only the KNX Bus.
KNX Bus Coupling Unit (BCU) integrated.
Designed for flush mounting into universal mechanism box.
Commissioning by ETS5 or later versions.

Equipment examples

New VMR equips its fixed supply bollards with IP44 sockets, or IP67 on demand.

Below it’s possible to find some example of standard configuration for the supply unit BOMBER with diameter 250 x H860mm:
Equipment A – 250xH860:
04 SCHUKO sockets
04 RCBOs 1P+N 16A 6ka 0,03
Equipment B – 250xH860:
04 2P+E 16A CEE sockets
04 RCBOs 1P+N 16A 6ka 0,03
Equipment C – 250xH860:
02 SCHUKO sockets
02 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE inclined socket
01 RCBO 4x16A 6ka 0,03
Below it’s possible to find some example of standard configuration for the supply unit BOMBER with diameter 250 x H1200mm:
Equipment A – 250xH1200:
06 SCHUKO sockets
06 RCBOs 1P+N 16A 6ka 0,03
Equipment B – 250xH1200:
06 CEE 2P+T 16A sockets
06 RCBOs 1P+N 16A 6ka 0,03
Equipment C – 250xH1200:
04 SCHUKO sockets
04 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE inclined socket
01 RCBO 4x16A 6ka 0,03
Below it’s possible to find some example of standard configuration for the supply unit BOMBER with diameter 325 x H860mm:
Equipment A – 325xH860:
06 SCHUKO sockets
06 RCBOs 1P+N 16A 6ka 0,03
Equipment B – 325xH860:
03 SCHUKO sockets
03 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE inclined socket
01 RCBO 4x16A 6ka 0,03
Equipment C – 325xH860:
04 2P+E 16A CEE sockets
04 RCBOs 1P+N 16A 6ka 0,03
Equipment D – 325xH860:
02 3P+N+E 16A CEE sockets
02 RCBOs 4x16A 6ka 0,03
Equipment E – 325xH860:
02 3P+N+E 32A CEE sockets
02 RCBOs 4x32A 6ka 0,03
Equipment F – 325xH860:
01 3P+N+E 63A fly socket
01 RCBO 4x63A 6ka 0,03
Equipment G – 325xH860:
02 sockets CEE 2P+E 16A
02 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
Equipment H – 325xH860:
02 2P+E 16A CEE sockets
02 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
Below it’s possible to find some example of standard configuration for the supply unit BOMBER with diameter 325 x H1200mm:
Equipment A – 325xH1200:
04 SCHUKO sockets
04 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
Equipment B – 325xH1200:
04 2P+T 16A CEE sockets
04 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
Equipment C – 325xH1200:
02 2P+T 16A CEE sockets
02 RCBOs 1P+N 16A 6ka 0,03
02 3P+N+E 32A CEE sockets
02 RCBOs 4x32A 6ka 0,03
Equipment D – 325xH1200:
08 2P+T 16A CEE sockets
08 RCBOs 1P+N 16A 6ka 0,03
Below it’s possible to find some example of standard configuration for the supply unit BOMBER with diameter 325 x H1350mm:
Equipment A – 325xH1350:
06 SCHUKO sockets
06 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
Equipment B – 325xH1350:
06 2P+T 16A CEE sockets
06 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
Equipment C – 325xH1350:
04 2P+T 16A CEE sockets
04 RCBOs 1P+N 16A 6ka 0,03
02 3P+N+E 32A CEE sockets
02 RCBOs 4x32A 6ka 0,03
Equipment D – 325xH1350:
09 2P+T 16A CEE sockets
09 RCBOs 1P+N 16A 6ka 0,03
Equipment E – 325xH1350:
04 2P+T 16A CEE sockets
04 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
01 3P+N+E 63A fly socket
01 RCBO 4x63A 6ka 0,03
Equipment E – 325xH1350:
04 SCHUKO sockets
04 RCBOs 1P+N 16A 6ka 0,03
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03
01 3P+N+E 63A fly socket
01 RCBO 4x63A 6ka 0,03