Modular Universal Dimmer for RLC+LED loads.

CONTROL by conventional Pushbuttons: short press – On/Off, sustained press – Dimming.
MEMORY FUNCTION: when switching-on by the pushbutton, the luminaires return to the same level as they had before they were switched-off.
DIN-RAIL MOUNTING: 1-module width.
MINIMUM DIMMING LEVEL SETTING KNOB, which avoids flickering at low levels.
PROTECTED AGAINST OVERLOADS AND SHORT CIRCUITS. Incorporates heating protection which reduces the light level in case of overheating.
MASTER/SLAVE CONFIGURATION, which allows increasing the load to be controlled from a single pushbutton.

– 230V LED Lamps dimmable by leading-edge
– 230V LED Lamps dimmable by trailing-edge
– 12V LED Lamps with electronic transformer
– Incandescence & 230V Halogens
– LV Halogens with transformer
– Dimmable Fluo-compact Lamps

Product reference RE EL1 LE1
Power Supply (V) 230VCA
Frequency (Hz) 50/60
Consumption 3VA
Output channels 1
Maximum power (VA) 0
Type of load Dimmable LED lamps, Incandescent and Halogens
Dimmable 230V LED lamps (leading edge) 4W ~ 100W
Dimmable 230V LED lamps (trailing edge) 4W ~ 350W
Dimmable 12V LED lamps with electronic transformer 6 transfo of 50W and 1 lamp per transfo or 3 transfo of 100W and 1 lamp per transfo
Incandescent and Halogen 230V (W) 400
Halogen lamps with ferromagnetic trafo (W 250
12V Halogen with electronic transformer (W) 400
Maximum Number of Equipments 0
Control Pushbutton
Maximum number of lighting pushbuttons 3
Module number 1
Connection terminals Captive Screws
Cable section (mm2) 4
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Installation DIN Rail
Minimum Working Temperature (ºC) (min) 0
Maximum Working Temperature (ºC) (max) 40
Protection Degree IP20, UNE 20324