Interface that allows the integration of RLC+LED loads within a DALI or DALI-2 lighting control system.

DIMMING TECHNOLOGY can be selected depending on the type of load: leading-edge or trailing-edge.
COMMUNICATION: Broadcast or Addressable DALI.
It admits the connection of an Auxiliary Pushbutton for the control of the Dimmer without the DALI Bus. The purpose of this input is to be able to test the lamps before installing the DALI Bus.
DIMMING URVE: Logarithmic or Linear, the possibility to select is incorporated.
PROTECTED AGAINST OVERLOADS AND SHORT CIRCUITS. It incorporates heating protection of resettable operation.

PHASE CONTROL DIMMING TECHNOLOGY (leading- or trailing-edge), being valid for different types of load RLC+LED:
– 230V~ Dimmable LED lamps
– 12V~ Dimmable LED lamps with electronic transformer
– Incandescence and 230V Halogens
– 12V Halogens with electronic transformer


Product reference RE DA2 LE3
Power Supply (V) 230VCA
Frequency (Hz) 50/60
Consumption < 0,7W
Output channels 1
Maximum power (VA) 0
Type of load Dimmable LED lamps, Incandescent and Halogens
Dimmable 230V LED lamps (leading edge) 4W ~ 70W
Dimmable 230V LED lamps (trailing edge) 4W ~ 250W
Dimmable 12V LED lamps with electronic transformer 5 transfo of 50W and 1 lamp per transfo or 2 transfo of 100W and 1 lamp per transfo
Incandescent and Halogen 230V (W) 250W
12V Halogen with electronic transformer (W) 250
Maximum Number of Equipments 0
Control DALI Y DALI-2
Maximum number of lighting pushbuttons 0
Module number 0
Connection terminals Captive Screws
Cable section (mm2) 2.5
Minimum Storage Temperature (ºC) (min) 0
Installation Junction box
Compatible with DALI Y DALI-2
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Degree IP20, UNE 20324
According with Directives Low-voltage 73/23/EEC; Comp. EMC 204/108/EC
According to the Standard IEC 60669-1, 2-1 & 2-3; IEC 62386-101:2014; IEC 62386-102:2014; IEC 62386-205:2009; IEC 62386-218:2018