KNX Capacitive Touch Thermostat for room temperature control with button to adjust the HVAC operating mode.
TOUCH TEMPERATURE CONTROLLER WITH HVAC MODE KEY – TM KNT 002
It incorporates a Display that shows both the Setpoint or Ambient Temperature and the Relative Humidity of the environment.
4 buttons with preset functionality:
Decrease Set-point Temperature
Increase Set-point Temperature
Switch On/Off Thermostat
Fan-Coil Speed
In addition, there are 2 free buttons which can be configured as a Switch, Dimmer, Control of Blinds / Shutters, Scenes, etc.
Integrated Temperature Sensor, Brightness Sensor and Relative Humidity.
Fancoil Speed LED.
Its main functionality is complemented with 4 Binary / Analog Inputs, which can be connected to a Door / Window Contact or a DINUY Temperature Probe.
Allows enabling and configuring one Heating and / or Cooling Thermostat.
Press or status indicator LEDs with ETS configurable luminosity and RGB color on the 2 freely configurable keys.
No need external power, only the KNX Bus.
KNX Bus Coupling Unit (BCU) integrated.
Designed for flush mounting into universal mechanism box.
Commissioning by ETS5 or later versions.
| Product reference | TM KNT 002 |
| Power Supply (V) | 21Vcc – 32Vcc |
| Consumption | 4mA |
| Programming by | ETS5 or later |
| Installation | Mechanism box |
| Start up | System Mode |
| Accuracy of the Temperature Measurement (ºC) | ±0,4ºC between -10ºC ~ +85ºC |
| Type of inputs | Binaries and Analogs |
| Minimum Working Temperature (ºC) (min) | -5 |
| Maximum Working Temperature (ºC) (max) | 45 |
| KNX Medium | TP1 |
| Protection Degree | IP20 |
| According with Directives | Security 2014/35/EU // EMC 2014/30/EU |
| According to the Standard | KNX Standard 2.0 // EN60669-1, 2-1 & 2-3 |
DIMENSIONS
Panašūs produktai
