Dimmer for LED lamps, in puck housing, without neutral-wire.
DINUY 2-WIRE DIMMER FOR LED LAMPS – RE PLE LE0
CONTROL by conventional Pushbuttons: short press – On/Off, sustained press – Dimming.
MEMORY FUNCTION: when switching-on by the pushbutton, the luminaires return to the same level as they had before they were switched-off.
PUCK HOUSING. Junction-box mounting.
MINIMUM DIMMING LEVEL SETTING KNOB avoids flickering at low levels.
PROTECTED AGAINST OVERLOADS AND SHORT CIRCUITS. Incorporates heating protection which reduces the light level in case of overheating.
COMPATIBLE WITH:
– 230V LED Lamps dimmable by leading-edge.
– 230V LED Lamps dimmable by trailing-edge.
– 12V LED Lamps with electronic transformer.
| Product reference | RE PLE LE0 |
| Power Supply (V) | 230VCA |
| Frequency (Hz) | 50/60 |
| Consumption | 0.7W |
| Maximum power (VA) | 0 |
| Type of load | Dimmable LED lamps |
| Dimmable 230V LED lamps (leading edge) | 4W ~ 80W |
| Dimmable 230V LED lamps (trailing edge) | 4W ~ 200W |
| Dimmable 12V LED lamps with electronic transformer | 4 transfo of 50W and 1 lamp per transfo or 2 transfo of 100W and 1 lamp per transfo |
| Maximum current input 1/10VDC (mA) | 0 |
| Maximum Number of Equipments | 0 |
| Control | Pushbutton |
| Maximum number of lighting pushbuttons | 0 |
| Module number | 0 |
| Cable section (mm2) | 0 |
| Minimum Storage Temperature (ºC) (min) | -30 |
| Maximum Storage Temperature (ºC) (max) | 70 |
| Installation | Mechanism box |
| Minimum Working Temperature (ºC) (min) | 0 |
| Maximum Working Temperature (ºC) (max) | 40 |
| Protection Degree | IP20, UNE 20324 |
| According with Directives | 2014/35/EU LV; 2014/30/EU EMC; 2011/65/EU RoHS |
| According to the Standard | UNE-EN 60669-2-1:2005, +erratum:2008, +/A1:2010, +/A12:2011 |
DIMENSIONS
INSTALLATION SCHEME
Panašūs produktai
