Retractable Power Tower VM01

The VM01 power tower is part of the retractable power tower family and is the solution for distributing, in total safety, electric energy and other services, such as water, compressed air, data transmission and sound systems.

The unit has an AISI304 stainless steel, or AISI316L on demand, structure and has two fronts available for electrical equipment and for the installation of valves for air and / or water distribution.

This type of power towers allows to optimize the outdoors and indoors, taking advantage of every available centimeter and avoiding the installation of fixed architectural barriers: it is possible to opt for a stainless steel manhole cover that can be filled to maximise its camouflage when is closed.

The VM01 model proved to be useful in different contexts, such as: market areas, squares, historic centers, municipal parks, bridges, car parks, parking areas for campers, hotels, swimming pools, soccer fields, sports centers, amusement and theme parks, workshops, railway and underground stations, airports, hangars, maintenance centers, warehouses, industrial sites, roads and highways … and much more!

New VMR offers a tailor-made design service, in order to meet the client needs.

Aprašymas
Atsisiųsti

Our products have proved their worth for the optimization of the spaces inside the red cross hangar in Nuremberg.

Specifically, VM01 retractable power towers were installed, with the task to facilitate airplanes maintenance work.

The possibility of storing the instrumentation when it is not necessary allows more space and to work in greater safety, obviating the problem of fixed architectural installations and barriers.

The retractable supply unit VM01 can also be installed outdoors.

This is the case of the Chelsea Stadium, where it was preferred to opt for a filled manhole cover, increasing the camouflage of the unit when it’s not used and allowing it to blend in with the grass of the field.

This type of unit is also recommended for city squares where worldly events and fairs are held: the possibility of extracting the supply unit only when necessary, prevents the misuse of services and vandalism, as well as preserving the architectural style of historic city centers.

Here on the side it is possible to see a version with a round filler cover at the Sforza Castle in Milan.

GENERAL DESCRIPTION
Retractable power tower, model VM01 from the “Urban Technology” line of New VMR S.r.l., for the distribution of energy and other services, made of press-bent AISI304 stainless steel painted RAL 1021 with two sides available for mounting electrical equipment and two sides for water taps or the compressed air outlets.
The sliding of the unit is ensured by self-lubricating polythene guides. Manual lifting thanks to the worm screw system and by its turning handle or special accessory to mount on an electric drill; or, only on demand and if it is possible, the unit may also come with a semi-automatic lifting ensured by gas rams and release key.

Available covers:
D400 cast iron EN 124 cover
C250 cast iron EN 124 cover to fill
400kN stainless steel* cover with almond finish
250kN stainless steel* cover to fill

* electro pickling and electropolishing with passivation of stainless steel treatment to finish and clean the covers from welding marks

TECHNICAL DETAILS

Structure
RBK concrete box
Structure made of AISI304 stainless steel
Structure made of AISI316L stainless steel (only on demand)

Connection system
Connection with H07RN-F cable (out of the concrete 3,00mt standard) to a dorsal shaft

Electrical specs
Voltage 230V/400V
Frequency from 50hz to 60hz
Standard protection of the sockets IP67 or IP68
Regulation EN 60947-1 and EN 61439

Additional equipment
Compressed air outlets
Audio / video connectors
RJ-data / video / telephone jacks
Water outlets / valves 1/2″ or 3/4″
Energy consumption meters
Water consumption meters
Prepaid system with rechargeable BADGE cards and CONTROL TOTEM EQUIPMENT EXAMPLES

EQUIPMENT EXAMPLES

New VMR equips its retractable power tower with IP67.

Below you can see some examples of electrical configurations for the retractable power tower type VM01:

Equipment A:	Equipment F:
12 2P+E 16A CEE sockets	03 2P+E 16A CEE sockets
12 RCBOs 1P+N 16A 6ka 0,03	03 RCBOs 1P+N 16A 6ka 0,03
01 heating kit	01 3P+N+E 63A CEE socket
	01 RCBO 4X63A 6ka 0,03
Equipment B:	01 3P+N+E 125A CEE socket
06 2P+E 16A CEE sockets	01 RCBO 4X125A 25ka 0,03
06 RCBOs 1P+N 16A 6ka 0,03	01 heating kit
01 3P+N+E 16A CEE socket
01 RCBO 4x16A 6ka 0,03	Equipment G:
01 3P+N+E 32A CEE socket	06 2P+E 16A CEE sockets
01 RCBO 4x32A 6ka 0,03	06 RCBOs 1P+N 16A 6ka 0,03
01 heating kit	01 3P+N+E 125A CEE socket
	01 RCBO 4X125A 25ka 0,03
Equipment C:	01 heating kit
10 2P+E 16A CEE sockets
10 RCBOs 1P+N 16A 6ka 0,03	Equipment H:
02 2P+E 32A CEE sockets	08 2P+E 16A interlocked sockets
02 RCBOs 1P+N 32A 6ka 0,03	08 RCBOs 1P+N 16A 6ka 0,03
01 heating kit	01 heating kit

Equipment D:	Equipment I:
04 2P+E 16A CEE sockets	04 2P+E 16A interlocked sockets
04 RCBOs 1P+N 16A 6ka 0,03	04 RCBOs 1P+N 16A 6ka 0,03
02 2P+E 32A CEE sockets	04 3P+N+E 16A interlocked sockets
02 RCBOs 1P+N 32A 6ka 0,03	04 RCBOs 4x16A 6ka 0,03
01 3P+N+E 32A CEE socket	01 heating kit
01 RCBO 4x32A 6ka 0,03
01 heating kit	Equipment L:
	04 2P+E 16A interlocked sockets
Equipment E:	04 RCBOs 1P+N 16A 6ka 0,03
04 2P+E 16A CEE sockets	02 RCBOs 4x16A 6ka 0,03
04 RCBOs 1P+N 16A 6ka 0,03	01 3P+N+E 63A interlocked socket
01 3P+N+E 16A CEE socket	01 RCBO 4x63A 6ka 0,03
01 RCBO 4x16A 6ka 0,03	01 heating kit
01 3P+N+E 32A CEE socket
01 RCBO 4x32A 6ka 0,03	Equipment M:
01 3P+N+E 63A CEE socket	04 2P+E 16A interlocked sockets
01 RCBO 4X63A 6ka 0,03	04 RCBOs 1P+N 16A 6ka 0,03
01 heating kit	01 3P+N+E 125A socket with electrical interlock
	01 RCBO 4x125A 25ka 0,03
	01 heating kit