PIR motion detector to be directly connected to input of EM KNT 002, EM K5X 004 or RE KNT LE3.
PIR motion detector to be directly connected to input of EM KNT 002, EM K5X 004 or RE KNT LE3.
Multifunction actuator that can wok as a dimmer for RGBW LED strips with 4 output channels and:
Switching of 4 independent output channels
Actuator for Blinds/Awnings with 2 output channels
1 Fan-Coil Actuator with 2 pipes (On/Off Valve and 3 Fan Speeds).
Installation on DIN rail.
Manual forcing of each channel by means of buttons on the front of the actuator, without the need for a Bus connection.
Possibility of 12 Binary and/or Analog Inputs: 8 Binary + 4 Binary/Analog.
Status LED indicators for each output channel.
LED status indicators for error status.
It is possible to enable up to 8 different functions: timer, scenes, logic operations, forced operation, etc.
Programming and commissioning using ETS5, or later versions.
Product reference | IR KNT 044 |
Power Supply (V) | 230 |
Frequency (Hz) | 50 |
Consumption | <7mA |
Output channels | 4 |
Switching capacity (A) | 16 |
LED lamps load (W) | 400 |
Incandescent and Halogen 230V (W) | 3000 |
Motores (VA) | 700 |
Binary/Analogic Inputs | 12 |
Module number | 4 |
Programming by | ETS5 |
Cable section (mm2) | 2.5 |
Minimum Storage Temperature (ºC) (min) | -30 |
Maximum Storage Temperature (ºC) (max) | 70 |
Minimum Working Temperature (ºC) (min) | -5 |
Maximum Working Temperature (ºC) (max) | 45 |
INSTALLATION SCHEME