4-CHANNEL RLC+LED DIMMING ACTUATOR – RE KNT 004

 

4-channel universal modular dimming actuator for leading and trailing edge phase control
(R, L & C loads).



4-channel Universal Dimming Actuator for:
Incandescence and 230V Halogen lamps.
LV Halogen lamp with electronic transformer.
Dimmable 230V LED lamps.
Dimmable 12V – LED lamps (electronic transformer).
Leading or Trailing edge dimming technology.
Optional manual dimming control by built-in potentiometer (even without bus connection).
Protected against overloads and short-circuits. Built-in resettable heating protection.
Modular installation device. DIN-rail mounting. 5-modules wide.
Anti-panic input for safety systems: disabling this input, the lamps will turn on to the maximum brightness ignoring the dimming.
Programming and commissioning via ETS4 or later version.

Product reference RE KNT 004
Power Supply (V) 230VCA
Frequency (Hz) 50
Consumption < 10mA
Output channels 4
Type of load Dimmable LED lamps, Incandescent and Halogens
LED lamps load (W) 0
Dimmable 230V LED lamps (leading edge) 4W ~ 120W (per channel)
Dimmable 230V LED lamps (trailing edge) 4W ~ 120W (per channel)
Dimmable 12V LED lamps with electronic transformer 5 transfo of 50W and 1 lamp per transfo or 2 transfo of 100W and 1 lamps per transfo
Incandescent and Halogen 230V (W) 300
12V Halogen with electronic transformer (W) 280
Halogen lamps with ferromagnetic trafo (W) 0
Motores (VA) 0
Maximum current input 1/10VDC (mA) 0
Maximum Number of Equipments 0
Binary/Analogic Inputs 0
Installation DIN Rail
Module number 5
Control KNX bus
Programming by ETS4 o posterior
Compatible with KNX
Connection terminals Captive Screws
Cable section (mm2) 6
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Degree IP20 , UNE 20324

 

DIMENSIONS

 

INSTALLATION SCHEME