DALI Dimming Actuator for Drivers or Ballasts, with fluorescent tubes or LED lighting.
3-CHANNEL DALI DIMMING ACTUATOR – RE KNT DA1
3-channel Broadcast DALI Dimming Actuator.
Each channel can control up to 64 DALI Drivers (128 in total).
Unidirectional and Broadcasting communication with the lighting fixtures.
Integrated overload, short-circuit and over-heating protection.
Anti-panic input for safety systems.
DIN-rail mounting, 5 modules wide.
Manual operation on device by Potentiometer (even without bus connection).
Programming and commissioning by ETS4 or later version.
| Product reference | RE KNT DA1 |
| Power Supply (V) | 110VCA – 230VCA |
| Frequency (Hz) | 50 |
| Consumption | 10W |
| Output channels | 3 |
| Type of load | Ballast or Driver DALI |
| Maximum Number of Equipments | 128 |
| Installation | DIN Rail |
| Module number | 5 |
| Control | KNX Bus |
| Programming by | ETS4 o posterior |
| Compatible with | KNX |
| Connection terminals | Captive Screws |
| Cable section (mm2) | 6 |
| Minimum Storage Temperature (ºC) (min) | -30 |
| Maximum Storage Temperature (ºC) (max) | 70 |
| Minimum Working Temperature (ºC) (min) | -5 |
| Maximum Working Temperature (ºC) (max) | 45 |
| Protection Degree | IP20 , UNE 20324 |
| According with Directives | Low Voltage 2014/35/UE; EMC 2014/30/UE |
| According to the Standard | KNX Standard 2.0 // EN60669-1, 2-1 & 2-3 |
DIMENSIONS
INSTALLATION SCHEME
Related products
