Dimming Actuator with 8 output channels, designed for the control of resistive, inductive, capacitive and LED loads.

Phase-cut dimming technology, both leading and trailing edge, configurable by ETS parameter:

230V dimmable LED Lamps.
12V dimmable LED Lamps with Electronic transformer. o Incandescent and 230V Halogens.
Halogens with Electronic transformer.

The 8 channels can be configured as:

Independent channels: It allows to control the different output channels independently.
Sequencer: The 8 channels are controlled together at the same time with predefined sequences.

It incorporates a keyboard on its front that allows manual control of each of the channels.
Protected against overloads and short circuits. It incorporates heating protection with resettable operation.
It has an LED indicating error due to over-temperature or overload.
Modular housing (8 modules width), for DIN-rail mounting.
Programming and commissioning via ETS5 or later versions.


Product reference RE KNT 008
Power Supply (V) 230VCA
Frequency (Hz) 50/60
Consumption < 10mA
Output channels 8
Type of load Dimmable LED lamps, Incandescent and Halogens
LED lamps load (W) 0
Dimmable 230V LED lamps (leading edge) 4W ~ 120W (per channel)
Dimmable 230V LED lamps (trailing edge) 4W ~ 120W (per channel)
Dimmable 12V LED lamps with electronic transformer 5 transfo of 50W and 1 lamp per transfo or 2 transfo of 100W and 1 lamps per transfo
Incandescent and Halogen 230V (W) 250
12V Halogen with electronic transformer (W) 250
Halogen lamps with ferromagnetic trafo (W) 0
Motores (VA) 0
Maximum current input 1/10VDC (mA) 0
Maximum Number of Equipments 0
Binary/Analogic Inputs 0
Installation DIN Rail
Module number 5
Control KNX bus
Programming by ETS4 o posterior
Compatible with KNX
Connection terminals Captive Screws
Cable section (mm2) 6
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Degree IP20 , UNE 20324