DINUY DIMMER FOR LED LAMPS – RE PLE LE3

 

Dimmer for LED lamps, in puck housing, with terminal block.



CONTROL by conventional Pushbuttons: short press – On/Off, sustained press – Dimming.
MEMORY FUNCTION: when switching-on by the pushbutton, the luminaires return to the same level as they had before they were switched-off.
PUCK HOUSING. Junction-box mounting.
MINIMUM DIMMING LEVEL SETTING KNOB, which avoids flickering at low levels.
PROTECTED AGAINST OVERLOADS AND SHORT CIRCUITS. Incorporates heating protection which reduces the light level in case of overheating.

COMPATIBLE WITH:
– 230V LED Lamps dimmable by leading-edge.
– 230V LED Lamps dimmable by trailing-edge.
– 12V LED Lamps with electronic transformer.

 

Product reference RE PLE LE3
Power Supply (V) 230VCA
Frequency (Hz) 50/60
Consumption 2VA
Maximum power (VA) 0
Type of load Dimmable LED lamps
Dimmable 230V LED lamps (leading edge) 4W ~ 100W
Dimmable 230V LED lamps (trailing edge) 4W ~ 350W
Dimmable 12V LED lamps with electronic transformer 6 transfo of 50W and 1 lamp per transfo or 3 transfo of 100W and 1 lamp per transfo
Maximum current input 1/10VDC (mA) 0
Maximum Number of Equipments 0
Control Pushbutton
Maximum number of lighting pushbuttons 3
Module number 0
Connection terminals Captive Screws
Cable section (mm2) 2.5
Minimum Storage Temperature (ºC) (min) -30
Maximum Storage Temperature (ºC) (max) 70
Installation Junction box
Minimum Working Temperature (ºC) (min) 0
Maximum Working Temperature (ºC) (max) 40
Protection Degree IP20, UNE 20324
According with Directives 2014/35/EU LV; 2014/30/EU EMC; 2011/65/EU RoHS
According to the Standard UNE-EN 60669-1:2018; UNE-EN 60669-2-1:2005, +erratum:2008, +/A1:2010, +/A12:2011; UNE-EN 60669-2-3:2007

 

 

 

DIMENSIONS

 

 

 

INSTALLATION SCHEME