MECHANISM-BOX-MOUNTED KNX MOVEMENT DETECTOR – DM KNT 003

 

KNX PIR Motion Detector with luminosity sensor.



The lux level and time delay can be set with the control knobs, by using the IR remote control (EM MAN DM0) or via ETS.
One PIR sensor and a high resolution lens can detect the smallest movement.
Depending on the parameterization by ETS, this detectors can work as:

Motion detection: depending on the movement and the daylight.
Twilight switch: teach-in brightness threshold for daylight-dependent switching.
Constant light control: with dimming telegrams.
Signal monitoring: motion detection without brightness sensor.
Brightness sensor: light sensor without motion detection.
Temperature sensor: sends the temperature value.

Flush mounted in universal mechanism box.
Detection area of 200º and maximum 8m.
Programming and commissioning by ETS3 or later version.

Product reference DM KNT 003
Power Supply (V) 21Vcc – 32Vcc
Consumption 9,3mA
Output channels 1
Maximum Number of Equipments 0
Detecting angle (º) 200
Mounting height (m) 1.5
Detecting length (m) 8
Programming by ETS3 or later
Start up System Mode
Maximum number of extra movement sensor 0
Minimum Time setting (seconds) 0,1
Maximum Time setting (minutes) 85
Minimum Brightness level (lux) (min) 5
Maximum Brightness level (lux) (max) 1000
Tecnology Infrareds (PIR)
Mounting Mechanism box
Admits contactor No
Zero crossing point No
Compatible with KNX
Minimum Working Temperature (ºC) (min) -5
Maximum Working Temperature (ºC) (max) 45
Protection Degree IP20, Class II