Wi-Fi video doorbell kit+plug-in supply – K40960

Video doorbell kit for surface mounting with: 1 video doorbell 40960 with built-in Wi-Fi for call forwarding with View Door app, camera with night vision and LED lighting, RGB LED ring-lighting push button, SD card and anti-tamper sensor, 1 24 Vdc 1 A power supply unit 40104 with interchangeable plugs for European, British, American and Australian standards

– 4 Mpx video image resolution, wide viewing angle (160° degrees) and image and video recording on SD card (8GB included)

– Presence of two opening controls for gate lock and gate automation

– Answer via smartphone, also remotely, and motion detection with notification via App

– Compatible with Amazon Alexa voice assistants

– Power supply via external power supply unit (not battery-operated)


– Call towards the Apps installed on one or more smartphones
– sd-card support with 8GB-128GB capacity
– IEEE 802.11 b/g/n 2.4GHz Wi-Fi connectivity
– Firmware update support via OTA (Over the Air)
– Adjustable conversation volume
– Adjustable call ringtone volume
– Actuators activation (lock and relay)
– Notifications support for:
– Motion detection
– Human presence detection
– Audio call
– Tamper detection
– Manual recording of photos or videos
– Automatic recording of photos or videos and 5-second pre-roll
– IR-cut filter with infrared lighting for optimum night-time visibility
– Electronic ringtone connection support (optional)
– Voice assistants support (currently devices: Echo, Echo Show. Echo Flex, Echo dot, Echo Studio)
– Status luminous indicator
– Support for up to 3 pre-settable voice messages
– The device requires an Internet connection via an IPv4 network with DHCP server

Technical data

– DC input: 24V (use the power supply unit supplied in the kit or the rectifier 40962)
– CMOS sensor 1/3” 4MPx
– Max. video resolution: 2K (2560 x 1440) pixel
– H.264 video compression
– Digital WDR (wide dynamic image regulation)
– Dimensions: 52(l) x 133(h) x 24.5(p) mm
– To work correctly there must be a stable connections to a Wi-Fi 2.4 GHz network with DHCP server and access to the Internet
– the Wi-Fi video doorbell smart device should be placed at a distance from the router or from the Wi-Fi network extender that guarantees a “good” or “medium” signal level, according to the indications of the VIEW Door App
– Maximum distance between Wi-Fi video doorbell and additional ringtone: 100 m
– Wi-Fi frequency range: 2412-2472 MHz
– Wi-Fi transmitted power: < 100 mW (20 dBm)
– RF frequency range: 433.92 MHz
– RF transmitted power: < 10 mW (10 dBm)
– Protection rating: IP54
– Lock: max 12V – 1.1A (maintenance current duration can be set in the app; maintenance current equal to 200mA)
– Relay: max 12V – 2A (relay activation time can be set in the app, from 0.5s to 10s, in 0.5s steps)

VIEW Door App

– Available for Android system (versions from 5.1 to 12.0) and iOS (from 10.0 to 15.0)
– Receipt of calls from Wi-Fi video doorbell
– Video and audio preview from Wi-Fi video doorbell
– List of calls received function
– Consulting function via timeline
– Image and/or video saving function from calls or consultation.
– Multi-system and multi-device management function (compatible with kits K40945, K40946, K40947 and K40955, K40956, K40957)
– Lock or relay remote activation
– Setting communication time from 60s to 300s.
– Possibility of setting image resolution to three levels: HD (high resolution: 2560 x 1440 pixel); SD (medium resolution: 1280 x 720 pixel); LD (low resolution: 640 x 284 pixel).
– Requires login with a MyVimar account